2PCS Bike Handlebar Bar End Plugs End Cap 22mm For Bicycle Grip Mountain BMX MTB

Description

Feature：
1.One long and one short design increases the friction of the handle bar cap, making the adsorption force stronger.
2.Widening the plugging surface protects the handlebar while preventing the sleeve from moving outward.
3.The plug is formed by compression molding of the same color, and no other color leakage will occur even if the plug is severely damaged.
Description：
Product Category：Bike Handlebar Plug
Name：ODI BMX Bar End Plug
Material: Wear-resistant pressure high polyester rubber
Color: Blue, Black, Red, Green, Pink, White
Weight: 20g (plus or minus 1-2g) weight of a pair
Applicable: children's slide car, mountain bike BMX downhill DH FR off-road vehicle can be used most of the handlebar size 22.2 or so
Packing list：
1 pair BikeHandlebar Plug
Installation instructions：
The normal size of the handlebars 22.2mm is relatively easy to install, but the thickness of the handlebars of each brand is not the same. The tube can be thinned with a little force to install. The tube is thicker (the caliber is small, such as The balance of the balance slide will generally be smaller).Fix it first when installing. Then put a little paper on the top of the block and slowly hammer it in with a hammer. When appropriate, you can increase the strength. All the handlebars on the market are basically Can be used, the charm of ODI!
On Oct-10-21 at 19:24:39 PDT, seller added the following information: